Stock held, not ordered
We can supply, from stock, all types of: Beams, Columns, Joists, Hollow Sections, Light Sections, Angles, Bars, Plate and Sheet and Gratings.
Processed within group
Cutting, drilling, profiling, blasting and priming all happen within group. One supplier.
One length or a full list
Single cuts and one-offs get the same attention as a full members list for a new build.
National range, local site
Backed by the Brown & Tawse group's buying power, run by the people who answer the phone in Rochdale.
Services
Sawing & Drilling
Cut to length, drilled and mitred to your spec, ready to fabricate. We cut to close tolerances, so what arrives on site matches the drawing without rework at your end.
Beams, columns, joists, hollow sections, angles and bars, all cut from stock we already hold.
Send a cutting list or a drawing and we’ll quote the material and the cutting together. If you’ve only got sizes and quantities, that’s enough to start.
Services
Profiling
Base plates, cleats, gussets, brackets, flanges. If you can draw it, we can cut it from plate up to 100mm thick, in any quantity from a single piece to a full production run.
Working from your DXF or drawing, we profile to shape and can drill or notch in the same operation, so the parts land ready to weld.
Send the file and we’ll quote the plate and the profiling together. One-offs are as welcome as batches.
Services
Shotblasting
Steel that arrives blasted and primed goes straight into fabrication or onto site. No sending it out to a third party, no extra transport, no waiting on someone else’s schedule.
We blast to SA2.5 and apply primer to your specification, whether that’s a standard red oxide, a zinc phosphate, or a system your client has already specified.
The service works alongside our cutting, so material can be cut, drilled and blasted before it leaves us as one order.
Services
Laser Profiling
Holes, slots, copes, notches and profiled ends, cut into tube and open section in a single operation. Parts arrive ready to assemble, so there’s no marking out, no drilling and no fettling on your side.
We cut circular tube from 12mm to 305mm diameter, square and rectangular from 12mm to 250mm, plus angles, channels and other open sections. Changing from mild steel to stainless takes minutes rather than a scheduled changeover.
Our CAD and CAM software lets us model your part in 3D before we cut, so you can confirm the geometry is right first time. Once it’s proven, every piece comes out identical, from the first to the last of the run.
With the stock already here, prototypes and one-offs can be turned round quickly, and a design change doesn’t mean waiting for material to arrive before you can test it.
What our customers say
Fabricators, engineers and manufacturers across the north
Tommy C.
Always a good service , i can't fault Glynis , Carl and Lindsay they try to go above and beyond when they can . You can have a good laugh with the drivers aswell.
GST Fabrication Ltd
An excellent supplier for us, a professional and prompt service.
S M
They were very helpful. We got what we needed.
Get started
Steel, cut and ready when you need it
Tell us what you're building and we'll quote it. One length or a full list, both get the same answer.